Products That Give You Towing Flexibility.

      GNACCESSORIES

 

Pull your Gooseneck Trailer with a Pickup or Semi-Tractor

GN5          4" Round  $160   add $19.00 for shipping
                       for trailers with 4"ID round tube
 
GN6    4 1/2" Square  $199  add $24.00 for shipping
                        for trailers with 4 1/2" ID Sq. tube
 
GN7         4" Square  $199   add $24.00 for shipping
                         for trailers with 4" ID Sq. tube

Order Page

 

GN5 has 7/8" holes thru both sides
GN6 has 1" holes thru both sides.
GN7 has 1" holes thru both sides.

 

 

9" Extended King Pins

SB5          4" Round  $240  add $26.00 for shipping
                        for trailers with 4"ID round tube
 
SB6   4 1/2" Square  $267  add $26.00 for shipping
                         for trailers with 4 1/2" ID tube
 
SB7         4" Square  $267  add $26.00 for shipping
                          for trailers with 4" ID tube
 
Order Page

 

SB5 has 7/8" holes thru both sides
SB6 has 1" holes thru both sides.
SB7 has 1" holes thru both sides.

 

Standard S.A.E. king-pin with 10" round bolster plate fitted to 18" long square or round tube. Durable Black powder coat finish. Fits standard  gooseneck trailer coupler tubes. 

 Allows Gooseneck Trailers to be pulled with Semi-Tractors. 30,000lb Trailer Rating

===============================================

Replace your coupler with a Heavy Duty Self-Latching Coupler

Rated at 28,000 lb.

 
GN1     4" Round  $189     add $21.00 for shipping
                   for trailers with 4" ID tube
 
GN2  41/2" Square $231   add $26.00 for shipping
                    for trailers with 4 1/2" ID tube
 
GN3      4" Square  $231   add $26.00 for shipping
                     for trailers with 4" ID tube

Order Page

9" and 16"  Extended Couplers are shown  HERE

 

GN1 has 7/8" holes thru both sides
GN2 has 1" holes thru both sides.
GN3 has 1" holes thru both sides.

 

PopUp GN8 self-latching 2-5/16" coupler (see below) fitted to square or round tube. Durable Black powder coat finish. Fits standard gooseneck trailer coupler tubes.   Drilled for padlock.  Includes cable assembly for releasing coupler without getting in bed of truck.

GN8 $94.00   GN8A  $105.00   Add $7.00 Shipping         Order Page

The PREMIUM Self-Latching gooseneck coupler.   This is the coupler used on all PopUp products.  Notice it can be fitted with a long shank padlock (not included) which prevents anyone from hooking it to a ball and towing the trailer.  The GN8 is just the coupler, the GN8A includes the coupler and a cable assembly which is used for remote release.

Drilled to accept a padlock.  If you want the very best coupler money can buy - look no further.  The GN8 self-latches when lowered onto a 2-5/16" hitch ball, and releases remotely with a cable that can be conveniently located near the trailer jack handle. For added convenience, a molded hitching guide is cast into the coupler to make hook-up easier.

Precision cast from nickel chrome alloy with a retaining pin machined from heat-treated 17-4 stainless steel, the GN8 has achieved a  rating of 28,000 pounds. 

The GN8A includes a GN8 coupler plus the cable and installation kit for remote coupler release.

This is the same great Self Latching coupler used on our popular RV Adapters.

 

 

 

 

 

 

 

Home - PopUp Ball - Flip-Over Ball - CC Couplers - SB Couplers - RV Adapters - RV5 Extended King Pin - GN Accessories
Installation Instructions - Dealers - Order Page - The Company - Quality Standard - Safe Towing
Contact Us - Security and Privacy - Warranty - Site Map


Copyright © 1999-2010 Young's Products, LLC, All Rights Reserved