Flip-Over Ball For Your
Semi-Tractor

FlipOver Gooseneck
Hitch for Semi-Tractors
Two Models to chose from:
205ST30K 30,000 GTW $408.00 + $50.00 Shipping
205ST45K 45,000 GTW $527.00 + $50.00 Shipping
Order Page
Mounts behind the fifth-wheel on Class 6, 7 & 8 trucks
with standard 34" wide frame. Requires 10" on
top of the frame and 4" down each side. Mounts with three
3/4" bolts on each side.
Fabricated from 1/2” high-grade steel, bolts to the frame of Class 6, 7
& 8
trucks. Complete with 2 5/16” ball and mounting hardware. The
45,000 lb unit comes with a Stainless Steel 2 5/16" ball. Also available
with 3” ball
The ball is locked in the one-piece machined steel socket with a spring
loaded stainless steel pin. Simply rotate the handle to retract the pin,
pull the ball out and store it inverted and out of the way in the
socket giving full access to the fifth-wheel.

How
it Works
The
Flip-Over Ball is locked in the one-piece ball socket with a spring
loaded stainless steel pin. To invert the ball, just reach into the driver
side rear wheel well and rotate the actuating rod 90 degrees. This cams
the retaining pin to the open position. Invert the ball, and rotate the
actuating rod back to its original locked position. That's all there is to
it.

Hassle-Free
The
Flip-Over Ball is not only easy - it's hassle-free. The ball socket
is machined from a solid piece of high-grade steel to insure strength and years of
service. The retaining pin is machined from stainless steel
so it will not rust and seize. The pin is held securely in the locked position
by a strong stainless steel spring. When the actuating rod is rotated 90
degrees a cam retracts the retaining pin to its open position so the ball
can be inverted. When the actuating rod is returned to its locked position
- the retaining pin securely locks the ball in its socket. extending ball and coupler life.

The 45,000 rated hitch is furnished with an extra
strong Stainless Steel Ball